Picture |
Heading |
Updated |
|
Shock Resistant Tool Steel S1
S7 is a shock-resistant air hardening tool steel, designed for high impact resistance at relatively high hardness. It offers toughness to withstand chipping and breaking, combined with high attainable hardness and good wear resistance. C.Si.Mn.Cr.Mo... |
2017-12-27 |
|
Hot Work Tool Steel(1.2343/X38CrMoV5-1)
Chemical Composition C Si Mn | P≤ | S≤ | Cr |
| |
China cold work tool steel 1.2363
1. Size:
Thickness:Produced by your requirements
Width:Produced by your requirements
Diameter:Produced by your requirements
2. Features:
Full of superhard carbide, which is small and uniform distributed; hardeness and abrasion res... |
2017-12-23 |
|
China tool steel&die steel(D3/1.2080/Cr12/SKD1)
1.2080 Cold Work Mould Steel of Features:
High hardenability, high hardness, high wear resistance, small deformation after quenching, good toughness
Supply Condition and Hardness:
Annealed, hardness ≤ 255HBS; Spheroidization annealed, hardnes... |
2017-12-23 |
|
China cold work tool steel DC53
1.Size:
Thickness:Produced by your requirements
Width:Produced by your requirements
Diameter:Produced by your requirements
2. Features:
Its toughness is excellent in cold work tool steel, thus, the mold made by DC53 seldom... |
2017-12-20 |
|
high quality tool steel1.2767
... |
2017-12-16 |
|
China cold work tool (D2/1.2379/SKD11)
DIN 1.2379 Cold Work Mould Steel
Wear-resisting toughness Cr-base steel. High-output pressing mould, circuit board mould etc.
Delivery Condition: Soften annealed ≤ 255HB
... |
2017-12-16 |
|
Plastic Mould Steels
1.2311 is a pre hardened high tensile tool steel which offers ready machineability in the hardened and tempered condition, therefore does not always require further heat treatment . This eliminates the risks, cost, and waiting time of heat treatment ... |
2017-12-14 |